Skip to main content

Manuale Utente

Site Details Page

To get to the Site Details Page, click on the Site name on the Sites page or the Details option in the context menu.

On the Site Details Page you can get information about various important parameters, such as:

  • the status and speed of Internet connections,

  • the parameters of the CPU and RAM load of the controller,

  • the number of the connected clients,

  • the detailed information on each connection,

  • the graphs of traffic consumption by the clients and connection types,

  • the distribution of the connected clients by the segments.

You can also "seamlessly" (with a single click) navigate to the web interface of the site's controller. Here you can find out how to set up access from the Internet to the web interface.

Site Details Page consists of tabs:

Dashboard

Dashboard — displays important and up-to-date information for monitoring the status of the site. The information is available in different views.

RMM-site-details-1-en.png

  1. At the top of the site details page there is a statistics collection toggle, enabled by default. Only users with the Owner or Administrator role can use it. When the toggle is turned off, the collection of two types of data stops:

    Data for the charts on the site page

    • Traffic distribution

    • CPU/Memory

    • Connections

    For client devices (Clients section), the following stop being updated:

    • Signal / Protocols — ht, linkSpeed, rssi, standards, security

    • Connection — wifiBand, wiredPort, isWired

    • Received — txBytes

    • Transmitted — rxBytes

    For extenders (Nodes section):

    • Signal / Protocols — ht, linkSpeed, rssi, txss

    • Connection — wifiBand, isWired

    • CPU

    • RAM

    All other polling of the controller and retrieval of service data continue unchanged.

    When the toggle is switched back on, data collection resumes, but no data is available on the charts for the period when it was disabled.

  2. The next panel consists of the site status, the number of connected nodes and clients online, as well as CPU and RAM parameters of the controller, which are instantaneous current values. You can read more about site statuses and errors here.

  3. Traffic distribution chart for the last 1 hour, 3 hours, and 1 day is available in 2 views:

    • Clients — traffic distribution for registered clients only. Unregistered clients are displayed as Unregistered clients traffic. If you want to register a client, you can do it via the Keenetic web interface. 

    • Connection type — traffic distribution for wireless and wired connections.

      Importante

      If the reboot coincides with the controller's unavailability, the data in the interface is displayed from the moment the controller becomes available.

  4. Client distribution chart in real-time is available in 2 views:

    • Segments — distribution of the online clients by the network segment. By default, the Home segment is activated on all Keenetic devices. If you want to create more segments, you can do it in the Keenetic web interface. 

    • Connection type — distribution of the registered online clients over wireless and wired connections.

  5. CPU/RAM values are plotted based on the last 1 hour, 3 hours, and 1 day of data for the site's controller. The graph shows the maximum values for a given time period.

    RMM-site-details-2-en.png

  6. Connections block shows all your controller's available connections and connection parameters. If your controller has more than 1 connection (for example, a backup channel via a 4G modem), this connection is also displayed in this block. The speed graph for a connected Internet connection is based on the last 1 hour, 3 hours, and 1 day. You can read more about how to connect to the Internet here.

    RMM-site-details-3-en.png

Nodes

In the Nodes tab, you can see all Keenetic devices included in your site — their statuses, models, clients connected to each node, and technical parameters. You can also customize the display of columns and sort and filter the data in the Nodes table.

Clients

In the Clients tab, you can see all registered and unregistered client devices connected to your site and their technical parameters. You can also customize the display of columns and sort and filter the data in the Clients table.

Operations

The Operations tab shows the current OS version installed on the site's controller and lets you manage its update. Here you can:

  • check whether a new OS version is available and review its changes in the release notes;

  • start an update manually with a single click of the Update now button (not available to the Viewer role);

  • enable/disable automatic updates and configure the schedule for their installation (not available to the Viewer role);

  • select the update channel (not available to the Manager and Viewer roles).

Nota

Note: Some actions on this tab are restricted based on your role. See the Team article for details

RMM-site-details-4-en.png

Notifications

On the Notifications tab, you can configure notifications for this site. These settings apply only to the current site. For information on configuring group notifications for all sites, nodes and clients, see the article Telegram notifications

Information

The Information tab stores details for quick communication with the contact responsible for the site.

RMM-site-details-5-en.png

The Teams information block displays the teams that have been granted access to the site. Next are blocks that can be filled in with additional information:

  • Address — for example, the actual address of the controller location.

  • Description — here, you can add any useful information for communication, such as name, phone number, e-mail, and necessary comments to this contact.

Only users with the Owner or Administrator roles can edit information about a site on the Information tab.

In questa sezione: