Оновлення KeeneticOS — Версія в розробці

The new country option for Israel is now available in the 5 GHz Wireless Network settings. [SYS-687]

The Quectel RM520N-GL 5G/4G LTE Cat 19 modem module is now supported. [SYS-698]

The Keenetic mobile app no longer shows the New network client: ... message when a wireless client fails to connect to the Wi-Fi. [NDM-2510]

The pop-up for VPN statistics now displays correctly on mobile phone screens. [NWI-1481]

The Scan the network option on the Wi-Fi monitor page now displays the scanning result correctly. [SYS-679] [Forum topic]

Changing settings of a wired interface no longer excludes it from the connection policy in the Connection priorities menu. [NWI-1488] [Forum topic]

The L2TP/IPsec VPN connection reconnects correctly after an Internet connection recovery. [NDM-2507]

The new Multi-AP backhaul compatibility option for Range Extender mode allows extension of the wireless coverage of a non-Keenetic Mesh enabled device that requires transmission of Wi-Fi data frames in the 4-address format. [NWI-1468]

The validation of occupied IP addresses on the Device lists page now works as before. [NWI-1456]

The link position of the edit schedule displays appropriately on mobile screens. [NWI-1463] [Forum topic]

The network topology picture from the Extender mode now displays correctly on mobile screens. [NWI-1477]

The AFP file sharing system component is updated, fixing the CVE-2022-23125 vulnerability. [SYS-681]

Fixed AFP file sharing service restart under certain conditions. [SYS-688]

The L2TP/IPsec VPN server configuration now applies as expected. [NDM-2495]

Additional USB modems are now supported, including:

The MiniUPnPd service no longer restarts after a DHCP lease update on a WAN connection. [NDM-2459] [Forum topic]

The authorization of Windows clients has been fixed for the captive portal Spot4 service. [NDM-2383]

Changing the state of the underlying interface for WireGuard VPN no longer causes a system reboot. [NDM-2424]

Restored L2TP/IPsec VPN server interoperability with common smartphone and desktop clients. [NDM-2433, NDM-2468] [Forum topic]

In the case of switching from backup to the primary WAN connection, network sessions are cleared, ensuring correct routing via the primary connection. [NDM-2456]

DNS content filter assignments now apply correctly after the device restart. [NDM-2457]

The Transit requests option now works as expected. [NDM-2479]

Mobile data connection from a smartphone via the Android USB Tethering technology now operates properly. [NDM-2485]

The OpenSSL library is updated to the latest version 3.0.7, fixing the CVE-2022-3602 and CVE-2022-3786 vulnerabilities. [SYS-669]

The logo alignment has been fixed for the Login page on mobile screens. [NWI-1387] [Forum topic]

Fixed the inline position of the Update channel information section on the System dashboard page. [NWI-1388] [Forum topic]

The Transit requests option now operates correctly for all available DNS resolution profiles. [NDM-2403]

The cause of periodic VPN IKEv2 tunnel disconnection has been fixed. [NDM-2413]

The text style of the Confirm button is changed so that the text description is better placed for all languages in mobile view. [NWI-1449] [Forum topic]

The OpenVPN client and server system component with the new 2.6 version no longer requires an installed IPv6 system component for operation. [NDM-2441]

The new Fail-safe configuration mode lets you change Keenetic's settings from anywhere without worrying that you'll lose control by choosing the wrong settings. If a remote management session terminates abnormally, the device will automatically reboot in three minutes, and undo the changes. [NWI-1429, NDM-1945, NDM-1844]

Internal Firewall rules have been updated to allow usage of the DHCPv6 relay agent. [NDM-2410]

The connection toggles On/Off on the Other connections page have been fixed, providing better responsiveness. [NWI-1419]

A connection to a public or personal Wi-Fi hotspot in Wireless ISP mode no longer clears the DFS (Dynamic Frequency Selection) status. [SYS-645]

The LLDP service does not cause the Service: "Link-layer discovery observer": unexpectedly stopped. unknown option "a". error message in the System log. [NDM-2409] [Forum topic]

The new relay multicast DNS (mDNS) option is now available in segment settings allowing transmission of mDNS messages between all segments. [NWI-1368]

The Wi-Fi channels used by Keenetic itself are highlighted now on the diagram and table on the Wi-Fi monitor page. [NWI-1389]

The menu titles are now visible in the mobile Web Interface. [NWI-1377] [Forum topic]

The Save button was missing when editing the speed limit setting; this has been fixed. [NWI-1390]

The Wake-on-LAN (WoL) option now works properly in network segments with security-level protected settings. [NDM-2385] [Forum topic]

Resolves the issue of duplicate entries in the system's routing table. [NDM-2391]

When an active dual-stack IPv6 connection is present, KeenDNS IPv4 access in the Direct mode operates correctly. [NDM-2378]

The root CA (Certificate authority) certificate validation has been fixed for legacy Keenetic devices. [SYS-632] [Forum topic]

The Fast Leave option provides a quick switch between IPTV channels via an IGMP proxy when supported by the ISP. [NDM-2375] [Forum topic]

You can use the following command in the CLI:

The OpenSSL library has been updated to version 3.0.5. [SYS-628]

The IPsec service management has been revised to improve stability and operation under heavy system load. This should prevent the system failed [0xcffd00ac], code = 255 error from appearing in the System log. [NDM-624]